Pence Went Deep. Can You?

by Web Master - October 22, 2014

Pitch FX

Face The Pitch Sequence That Led to Pence’s Bomb

Thanks to Baseball by Brooks’ very cool pitch-tracking technology and the programmable features of our cutting edge video hitting simulators, we’re going to be choosing the most pivotal at-bat from every Giants World Series game and allowing our customers to face that exact sequence of pitches. Last night, we chose Hunter Pence’s epic first inning 7-pitch at-bat, culminating in a game- (and hopefully, series-) changing 411-foot home run.

As the image above shows, Pence saw:

  1. Four-seam fastball, down and away (we move this to the outside corner so that it’s a hittable pitch)
  2. Changeup in the dirt (we move this up to the hitter’s knees so that it’s a hittable pitch)
  3. Sinker down and in
  4. Four-seam fastball middle away
  5. Four-seam fastball up and away
  6. Four-seam fastball middle in, and
  7. Four-seam fastball, right down Main Street.

As the arrows above show, we move the balls that were just out of the strike zone onto the edges for a more enjoyable hitting experience. (While it was very dramatic for Pence to work a 3-2 count, our customers prefer to get their hacks in!) We can adjust the relative speed of each pitch as well, so you can face the equivalent of the same 94-MPH heater from Shields that Pence did, or you can dial it back to about 44 MPH for youngsters. The seven-pitch sequence will repeat twice and then the rest of the 15-pitch round will be grooved fastballs down the middle: just like facing “Big Game” James!!!

Come see us and give it a try, and


Hitting the Inside Pitch

by Max - January 25, 2014

I hear coaches tell kids,”pull the ball the right way.” That’s great, but most of the time there is no explanation on HOW to pull the baseball correctly.

We all know that great feeling when you hit a line drive in the left center gap, and the not-so-happy feeling when you end up with the grounder to short. But what makes the difference? Here are few tips for hitting the inside pitch – to help you cut down on the roll overs and increase our line drives in the pull gap.

Common Mistake #1: Too much weight on the back leg

When this happens there is a tendency to “spin off” the ball. This means we are rotating instead of driving through the ball.

To square the ball on the barrel you have to come around the baseball which makes contact too far out in front. If you do hit it squarely most likely it will result in a ground ball or a severe hooking line drive.

What this means for hitting the inside pitch:

  • Make sure our weight distribution is 50/50 between our front and back leg as we start rotation.
  • Posture is especially important on inside pitches. The more upright our head is, the easier it is to rotate.

Common Mistake #2: Not fully rotating your back leg

Failing to rotate fully makes the path to the ball longer, and since your swing has to be quicker and contact is further out in front than a pitch that is outside, you may have to cheat or just not hit the ball well consistently.

What this means for hitting the inside pitch:

  • We must clear our back hip by fully rotating our back hip
    through the ball. This creates a shorter path for our hands to
    get to the baseball. It also allows our hands to stay tight to our
    body which keeps them inside the baseball.
  • By attacking the ball in this manner we can now work through
    the baseball (with our legs and hands) instead of around the
    ball. This will allow us to drive the ball with backspin and not a
    hooking spin.

Common Mistake #3: Not driving through the ball with your legs.

The same swing you take on a pitch right down the middle is the same swing you want to take on an inside pitch. The only difference is that your path needs to be a little shorter and quicker.

What this means for hitting the inside pitch:

  • Since your hands follow your legs, using your legs to drive in a
    straight path through the baseball means your arms and bat
    will follow.
  • A firm front leg is important for this. If you spin off your front
    heel, it’s easy to rotate around the ball instead of driving
    through it. This is an easy habit to fall into because the natural
    tendency is to try to create more space for yourself by opening
    up. Opening up your front foot starts a chain reaction that
    causes your entire front side to open up too quickly – which
    creates a slower, circular path to the baseball instead of the
    direct, straight line that is needed to reach the inside pitch in time.
  • Be sure your back hip goes to the ball.


Most pitches you will see are on the outer portion of the plate so that is what you should really work on, but when a pitcher makes a mistake over the inner half of the plate, it is time to make him pay.

If you apply these 3 tips for how to hit the inside pitch you will accomplish a shorter and quicker swing that is capable of correctly hitting an inside pitch. If you can incorporate these tips into your swing, you’ll avoid some of the common problems most people have when hitting an inside pitch, turning your pulled ground ball outs into line drives in the pull gap.